AT commands for 1670 CBM 1200bps modem 
--------------------------------------
 
300/300      [6] Networklu Commodore Computer Conference
Konu:        1670 specs
Tarih:       May 16, 1997 02:28:00 (0 days old) (1845 bytes)
G”nderen:    David Cheshin @1:252/305 FIDOnet     
Alici:       Dave Lund @Echomail FIDOnet     
 

A    Auto answer on
A/   Redo last command
D    Dial number
P    Pulse dial
T    Tone dial
.    Pause for 2 sec.
E0   Echo off
E1   Echo on
F0   Half duplex
F1   Full duplex
M0   Speaker off
M1   Speaker on during dialing only
M2   Speaker on (at all times)
Q0   Send response codes to screen
Q1   Do not send response codes to screen
S    (Set S registars with (Sn=#) veiw S registar with (Sn?)
S0=  0 - Disable auto answer  1-n - Answer on the nth ring.
S2=  Set character to be used for escape code (default S2=43)
S7=  Setthe length of time (in seconds) for carrier detect
V0   Make the modem messages appear in Terse (numeric values)
V1   Make the modem messages appear in Verbose (words ie NO CARRIER)
default setting
X0   Use standard response code set.
X1   Use extendec response code set.
Z    Reset modem
+++  Escape code sequence
 
A note that if you have the 1670 with the 4 dipswitches then your auto
answer is controled by one of the switches.
 
 * Origin: Encode Online  Orillia,Ont.705-327-7629 (1:252/305)